Insulation Process for Garage Doors

Insulating a garage door has numerous benefits. Fixing insulation at your garage door shall increase the thermal soothe of your garage, lessen your energy bills, alongwith providing an added barrier against moisture infiltration and noise. Opportunely, this could be done with few tools and a little basic supply from a hardware shop. By following some simple steps, you could learn to insulate your garage door yourself.

  • Measure the garage door panels 

Panels are rectangular portions of a garage door that are buried from a latticed frame. You have to install the insulation inside the face of the door, so compute from inside. Use a measuring tape to find out the dimensions of every panel; you do not have to be precise at this point, since you just require the dimensions to identify the quantity of insulation to be purchased.

  • Buy the Insulation

There are two different types suitable for garage doors. First type, which can be used, is reflective foil insulation. The insulation is generally about half inch (12.5 mm) thick, and has a sheet of polyethylene foam intact between reflective aluminium foil. The insulation is rolled to sale, and has the advantage of being flexible. Ensure you investigate that how this material can insulate in cold and hot weather.

Another suitable type for use in garage doors is the polystyrene foam. This kind of insulation is stiff, and sold in bulky sheets. Polystyrene can insulate more than the reflective foil insulation, however it can be rather difficult to work with because of its rigidity. Search around for the maximum R-value you can fix in the space.

You should not make use of neither the fiberglass batt insulation nor the spray-in insulation. These are not suitable for use in garage doors.

  • Slice the insulation into size. 

Use a straightedge, measure the dimensions of one garage door panel in a sheet of insulation, and mark the dimensions by a pen. Use the straightedge like a guide, and cut the sheet into size with utility knife. It is always best to be by the larger side, since you can always cut off the surplus later.

  • Fix the insulation in each garage door pane. 

Place the insulation up next to the recessed one door panel. If the garage door has metal frame, which extends off the door, you must be able to insert the insulation in the frame itself.

  • Affix the insulation to the door. 

Use an aluminium foil tape for fixing the part of insulation into the garage door. If you are able to insert the insulation in the frame, you might not need additional tape.

  • Think about purchasing garage door’s insulation-kit as an option 

Insulation kits are available readily at hardware shops, and can pace the process, since the insulation will previously be cut into sized panels. Ensure, still, that the panels of the kit are not lesser than the garage door’s panels.

You can do the whole process yourself and if needed call a Coral Springs repair garage door